TAKK INDUSTRIES INCORPORATED
8665 E. Miami River Rd. Cincinnati, Oh 45247 USA
Fax (513) 353-4315 Phone (800) 792-8255 or (513) 353-4306 [email protected] www.takk.com
ALWAYS
turn the Power Supply
OFF
or disconnect power to the unit before unplugging the Bar or cleaning
the system. Not doing so could result in personal electrical shock and/or damage to the unit.
The emitters on the Ion-Edge Bar are resistively coupled with 100Mohm resistance in
series with the high
voltage source that makes the emitters shockless when touched individually.
DO NOT
allow personal contact
with more than one point at a time. In general, contact with emitters should be avoided.
By design, the Ion-Edge emitters are very sharp. Take care when handling the bar.
It is recommended that all electrically conductive surfaces in the Ion-Edge’s ion field be earth grounded to
prevent those surfaces from becoming electrically charged by the AC source.
A byproduct of the Ion-Edge Bar is ozone. The ozone emission from the Bar is less than 0.1ppm and well
below OSHA standards providing safe working conditions around the system.