Sensitivity
attenuation LED
●
Self checking
●
Manual
checking
ER-02
ER-02
Bidirectional communication
Note: Only installed on the receiver
8-9
Lit
Flashing
Off
Lit
Flashing
Off
: Lit
Note: Installed on the transmitter and the receiver
8-11
Note: Only installed on the receiver
8-10
LIGHT SENSITIVITY SIGNAL FUNCTION
EXTERNAL ENVIRONMENT DIAGNOSTIC FUNCTION
ALIGNMENT WIRELESS CHECKER CONNECTION FUNCTION
The LED lights up when the light reception level is considered to be
insufficient in order to notify the operator of that an inspection is
necessary.
The light reception level falls below the specified level under adverse environmental conditions such as dense fog or heavy rain.
This function issues an environmental output if such conditions are maintained.
Note: The environmental output continues until the light reception level for both the upper and lower beams recovers to the
specified level (for 5 seconds at the shortest).
Using the alignment wireless checker that is sold separately enables easy and accurate optical axis adjustment.
Providing sufficient margin of sensitivity increases the resistance to the dense fog, snow, and heavy rain, which makes it
possible to construct a highly reliable intrusion alert system.
⑯
In case of using alignment wireless checker "ER-02" (Soled separately)
If an electrical supply to PXB-100SW is under 10VDC, Don't share an electrical supply with ER-02.
Please use battery to operate ER-02 and set dipswitch "supply from battery "in ER-02.
Even if there is no any electrical supply to PXB-100SW, It is possible to align an optical axis of PXB-100SW using
ER-02 with battery.
(In case of an electrical supply to PXB-100SW is over 10VDC, it is possible to share the electrical supply with ER-02.)
Bidirectional communication
Bidirectional communication
Bidirectional communication