3
MACHINE DESCRIPTION
■
Front, rear, Ieft and right
This manual refers the front, rear, left and
right of the machine as seen when sitting in
the operator’s seat with the bucket visible to
the front.
■
Designated operations
Use this machine primarily for the following
operations:
¡
Carrying
¡
Leveling
¡
Loading
■
Features
¡
Hydrostatic drive system.
¡
Roll Over / Falling Object Protective Structure (ROPS/FOPS) tilt-up Canopy.
¡
Rubber crawlers combine the capabilities of a crawler loader.
¡
Low engine noise and exhaust emissions.
¡
Two-way auxiliary hydraulics.
¡
Pilot operated joystick controls.
¡
Engine emergency stop system.
■
Break-in period
When the machine is new, heed the instructions below when operating the machine for the
first 100 hours (as indicated on the hour meter).
Using a new machine roughly without breaking it in will lead to quicker deterioration of machine
performance and may shorten the machine’s service life.
¡
Warm up the engine and hydraulic oil sufficiently.
¡
Avoid heavy loads and rapid operations. Operate with a load of about 80% the maximum
load.
¡
Do not start up, accelerate, change directions, or stop abruptly unless necessary.
RIGHT
LEFT
REAR
FRONT
T7A004E
