background image

26.2.2021

05-05-0045 

1 /

 

 

ø 48 Small DN Tachometer kit Instruction manual

 

Product no. 05-05-0045. 

 
 

Thank you for purchasing our product. 
Please observe the following points when using the product. Always check the contents of the kit before 
installation. If you have any questions, please consult your dealer. 

◎ Illustrations, photographs and other descriptions may differ from this part. 

Please be aware of this beforehand. 

Features. 

Tachometer kit exclusively for the Monkey 125. Placed next to the stock meter, it is very easy to 

check. Comes with a vehicle-specific sub-harness, so no modifications to the wiring are required. 

The meter 

body features a ø 48 small DN tachometer (white LED)

Digital signals & small motor fully control the pointer angle. Highly reliable construction with high pointer holding power. 

☆Please read this before use☆

 

◎ This instruction manual is intended for perso

ns with basic skills and knowledge. 

If you are not confident about the installation or do not have the necessary tools for installation, please do not carry out the 

installation work and ask a designated or certified factory or other vehicle service provider to carry out the installation. 

◎ 

The company accepts no liability for any accidents, injuries or damage to property that may occur during use of the product. 

◎We do not guarantee any parts other than this product in any matter, even if a defect occurs 

after installation and use of this product. 

◎Combinations with other companies' products are not covered by the guarantee and should not be used

◎The 

warranty does not cover the product if it has been processed or otherwise altered. 

 

Precautions for use 

Some external H.I.D. kits may produce high voltage noise from the ballast/inverter (voltage converter) which may adversely affect the 

digital circuits, depending on the quality, and depending on the degree, may cause meter failure, so do not install. Do not install 

external ignition systems (ignition coils and plug cords) as the increase in ignition voltage will increase the noise which will have an adverse 

effect and may cause a fault. 

Do not install external power generators with insufficient charging power, as they may cause a drop in battery voltage and control voltage 
malfunctions that may lead to malfunctions. 

In. 

[No driving with headlights off.] 

If a vehicle with permanently illuminated headlights is run with the lights off due to easy modification (just disconnecting the wires), 

the unconsumed power will increase the voltage across the entire vehicle body. If the vehicle continues to run, the battery may 

deteriorate due to overcharging and the genuine regulator may fail due to excessive strain. 

The negative effects are stronger in vehicles with engine modifications that run at higher engine speeds than normal. 

If the headlight has burnt out, stop driving immediately or, if it is absolutely necessary, switch to high beam (and adjust the optical 

axis). At this time, drive at as low a speed as possible. 

A moisture drain is provided on the back of the unit to allow any moisture that has entered to escape. Take care not to spray water 

directly onto the bottom of the meter when washing the car, for example. Also, if the meter is placed in humid conditions, moisture 

may enter the unit and cause the screen to become blurred. 

 

 

attention 

(heed) 

Indicates information that may cause injury to persons and damage to property if the indications are ignored. 

■ Always carry out work etc. when the engine and 

muffler are cold (engine and muffler are cold).

 

(This may cause burns.

) ■When performing work, 

etc., be sure to do it when the engine and muffler are cold. 

■ When carrying out work, prepare the appropriate tools for the task

.

 

(Damage to parts or injury may result.

■The product and frame may have edges and protrusions. When working on the product, protect your hands

.

 

(This may cause injury.

 

Warning. 

Indicates a potentially hazardous situation which, if ignored, could result in death or serious injury. 

D

o

 

n

o

t

 

carry out work if you do not have the necessary skills or knowledge. (Work errors due to lack of skill, knowledge, etc. may lead to accidents 
due to damage to parts.) 

■ When working on the vehicle, stabilise the vehicle on a level surface and work s

afely.

 

(The vehicle may fall over during operation, 

resulting in injury.) 

■If damaged parts are found during inspection and maintenance, do not reuse the parts and replace the damaged parts

(If used as is, parts may break, resulting in an accident.) 

■ Alw

ays run the engine in a well ventilated area. Do not start the engine in such an enclosed area. 

(This can lead to carbon monoxide poisoning.

Before driving, be sure to inspect each part of the vehicle to check for loose threads, etc. If any are loose, retighten them securely to the 
specified torque. 

(Parts may fall off, etc., leading to an accident.) 

■If an abnormality occurs while driving, immediately stop the vehicle in a safe place and stop driving

.

 

(This may lead to an accident.

■When carrying out 

inspections and servicing, follow the procedures and procedures described in this manual, the service manual, etc. 

(Improper inspection and maintenance can lead to accidents.

Do not use any parts other than those specified.

 

(Damage to parts may result in an accident.

Applicab
le car 
models 

Monkey 125  

(JB02-1000001 - ) 

Monkey 125 Thai model (MLHJB02) 

 

Summary of Contents for 05-05-0045








Reviews: