- 6 -
Setup in Data mode
[Operating procedures]
1)
Click on the Menu bar to select “Data Mode”, and it displays Data Mode window. (Refer to Fig.6,7)
[ Fig.6 ] Tool > Mode setting > Data Mode
[ Fig.7 ] Data Mode
2)
Click “Restricted area” on the left of the Data Mode window and select the box “Use Vacuum Unit”.
In addition, if you click “Vacuum” button at the top right corner on the display, you can demonstrate
the operation check as many times as needed. Click the OK button to get the display back to the
Main window.
Summary of Contents for APT-9411 Series
Page 2: ......
