TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 117 / 240

Using via Digital Data Communication
117
HX Compatible Commands
HX compatible commands are commands which conform to Takasago HX Series communication command format.
Remote control is possible only for common functions between HX series and HX-S-G2 series since the commands
and HX are compatible.
HX commands are listed below. For details on each command, see the pages listed below.
SET Command List
Command
Name
Control Command Functions Page
A Assigning Device Address Page 119
AR Executes alarm reset Page 119
CL Resets set parameters Page 119
LC Sets OCP current Page 120
LV Sets OVP voltage Page 121
MC Sets Output Current Page 122
MV Sets Output Voltage Page 123
OT Sets output ON/OFF Page 124
TP Executes breaker trip Page 124
Read-Back Command List
Command
Name
Read-Back Command Functions Page
TK0 Read-back set parameter Page 125
TK1
Read-back measurement data
(Voltage/Current)
Page 125
TK2
Read-back information of equivalent model
of HX
Page 126
TK3 Read-back status information Page 126
TK4 Read-back measured voltage Page 127
TK5 Read-back measured current Page 127