TAKASAGO HX-S-G2 Series, Instruction Manual

Page: 126 / 240

Using via Digital Data Communication
126
TK2
: Read-Back ID-ROM Parameters
Function: Read-back information of equivalent model of HX
Format: TK2
Read-Back Format: A*1,*2,MV*3,MC*4,LV*5,LC*6
*1~*6:Read-Back Value
Read-Back Value: *1: Device address of the responded HX-S-G2 power supply
*2: Model Information
*3: Constant Output Voltage (Max. no. of decimal places is 1)
*4: Constant Output Current (For max no. of decimal places, refer to Output Current Range in
page 122)
*5: Maximum Over Voltage Set Value (Max. no. of decimal places is 1)
*6: Maximum Over Current Set Value (For max no. of decimal places, refer to OCP Current
Range in page 120)
<Ex> HX-S-030-200G2FI(Case when full specification / isolated OP attached)
A1,TK2
A1,HX-S-G2FI,MV30.00,MC200.0,LV33.00,LC220.0
TK3
: Read-Back Status Information
Function: Retrieves the status information from the HX-S-G2 power supply with the specified device address
Format: TK3
Read-Back Format: A*1,STAT*2
*1, *2: Read-Back Value
Read-Back Value: *1: Device address of the responded HX-S-G2 power supply
*2: Status is represents as 0 or 1
STAT*******
6 0
Retrieved Status Information List
Bit Status Name Summary 1 0
0 P-ON(M)_STS P-ON(Master) Status
Main Power Supply
ON Main Power Supply
OFF
1 OHP_ALM
OHP(Over Heating Protection)
Error
Error Normal
2 - Always 0 - -
3 OCP_ALM
Over Current Protection
Triggered
Triggered Normal
4 OVP_ALM
Over Voltage Protection
Triggered
Triggered Normal
5 CC_STS CC Operation Status CC operating Not CC
6 CV_STS CV Operation Status CV operating Not CV
<Ex.>
A1,TK3
A1,STAT1000001