Page | 24
Be sure to remove the battery from the remote control and put it in a
safe and reliable place, if you are not using it for a long time.
The remote will always be in standby mode. If the indicator is not lit, the
battery was exhausted. In order to confirm the normal use of the remote
control, please replace the remote control battery regularly and on time,
in the following steps:
1) Use a 1.8mm round head screwdriver (not supplied) to remove the 4
screws from the rear cover of the remote control, allowing you to open it.
2) REMOVE THE OTHER 4 SCREWS FROM THE CIRCUIT BOARD.
3) LIFT THE CIRCUIT BOARD AND SLIDE THE BATTERY AS SHOWN IN THE
ILLUSTRATION.
NOTES: Do not turn the circuit board to avoid reversing the functions of
the camera and video buttons.
4) Install the new battery by holding the "+" pole up.
5) replace the 4 screws on the circuit board.
Summary of Contents for MV137
Page 28: ...Page 27...
Page 29: ...www takara fr...
