Page
30
WARNING STARTING
Make sure that the Balance Bike is in the "parking"
position (kickstand in the open position, on a flat, sloping
or uneven surface), folding ring, safety pin, clamping ring
tightly closed, that the loader unplugged and the balance
bike is off (off).
WARNING DRIVING
Do not turn the handlebar abruptly as this may increase the risk
of falls, as well as damage the steering column of the balance
bike.
Control your speed! You must adapt your speed to your area of
use, NEVER push the balance bike to its maximum speed as
you may lose control of your device and cause an accident. In
A bell positioned on the handlebars will allow you to signal
your presence to others.
viii)
Start / Driving
1 Sit on the saddle of the balance bike.
2 Put your Balance Bike in the On position.
3 Raise the stand and place both feet on the ground to maintain
stability (stability) before starting.
4 Gently turn the throttle grip on the right side of the handlebar.
5 The balance bike will move, you can accelerate to gain speed.
6 After a few meters, you can put your feet on the footrests, the
balance bike will be in equilibrium position (stability).
7 To turn right, turn the handlebar to the right, to turn left, turn
the handlebar to the left.
8 If you release the throttle the balance bike will slow down until
it stops, it will be necessary to put the feet on the ground to not
lose the balance (stability).
9 The use of the right and left brakes is discussed in the
following paragraph.
10 Put the balance bike back in the "parking" position when it is
completely switched off
