Dice
Touch
Quick Guide -5
TAKARA BIO INC.
Check 'Add to end of Profile' or 'Insert at start
of Profile' or Insert after xx without cycling.
The first screen of the Add Event Wizard:
●
Cycling (2
～
10 Step)
●
Hold
●
Ramp (
≦
2.5
℃
/sec)
●
Pause
Cycling x Step will proceed to generate a multi-step cycling event.
Change the number of steps for the cycling event.
Input the number of steps between
Within the cycling configuration screen there are
2 and 10.
numeraous options that input temperature, hold
time and so on.
Ramp event allows the block temperature to be ramped either up or down between
two set temperatures over a preset length of time at temperature change less than
or equal to 2.5
℃
/sec.
If the Ramp rate is more than 2.5
℃
/sec,
the system message that refer to the picture on the right is appeared.
Step Options is supported for specific measurement (p.9) and
moves the positive blue step for left or right place.
