background image

Symptom

Check

Seat and backrest

Check the fuses in your fuse box to make sure they haven’t 

burned out. 

After the long time operation, Over temperature protection 

    system works. Please leave the chair for 10 minutes and start 

    operation. 
    Unplug the machine and then plug it in again and see if it will 

    operate.

In case other than those listed above, contact your local Takara Belmont dealer.

doesn't move

Make sure that the main switch has been turned on.

Make sure that the power plug is properly plugged into the outlet.

If you have a breaker box, check for tripped breakers.

Main Switch

ON?

Fuse Box or Breaker

No Water / Hot Water

Make sure that the water & hot water stop valve has been 

turned on.

The temperature of 

hot water is too low

Check to make sure that the temperature setting of water 

supply tank is properly.

Make sure that the temperature setting of the chair is properly.

Slow drainage

Check to make sure that the hair removed from the hair catcher

completely.

If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly
qualified person in order to avoid hazard. 

8. Troubleshooting

-12-

Caution

Summary of Contents for YUME

















Reviews: