![Takara Belmont SPA MIST II Operating Instructions Manual Download Page 32](http://html1.mh-extra.com/html/takara-belmont/spa-mist-ii/spa-mist-ii_operating-instructions-manual_3315202032.webp)
The power cannot be
turned on
(No indication on the
control panel)
Is the power plug correctly inserted
into the wall outlet?
Insert the power plug firmly into
the wall socket.
Is the power switch turned on?
Set the power switch to the "ON"
position.
Is the fuse on the distribution panel
or the breaker switch in the shop in
the "ON" position?
Set the fuse on the distribution
panel or the breaker switch to the
"ON" position.
Is the problem not rectified when the
power plug is disconnected and is
then inserted again?
Immediately stop using the machine,
turn off the power switch, disconnect
the power plug, and then immediately
contact the nearest dealer or our
company directly.
When the problem cannot be rectified
even if the measures are taken,
immediately stop using the machine,
turn off the power switch, disconnect
the power plug, and then immediately
contact the nearest dealer or our
company directly.
Execute setting up of the temperature
level key again.
Immediately stop using the machine,
turn off the power switch, disconnect
the power plug, and then immediately
contact the nearest dealer or our
company directly.
The power cannot be
turned on though the
power switch is set to
the "ON" position.
Failure of the machine might be
suspected.
Mist does not come out.
When either of the previous
indications blink,
see the section "State Indication"
on page 30.
Check that water accumulates in the
flexible hose.
Discharge the water accumulated in
the flexible hose.
Discharge the water accumulated in
the flexible hose.
The temperature of mist
is low or high.
Check that a space exists between the
turban and the mist cap.
Check that the hook and loop fasteners
of the mist cap is robustly fixed.
Reset the mist cap in the manner to
eliminate any space.
Reset the fastener in the manner to
eliminate any space.
Close the drain cock.
Mist leaks from around
the mist cap.
Water leaks from the
drain outlet.
Check that the drain cock is closed.
Check that the temperature level
setting is correct.
Check that water accumulates in the
flexible hose.
B e f o r e A s k i n g f o r R e p a i r s
Phenomenon
Check Point
Countermeasures
When the problem cannot be rectified even if an inspection is made according to the table shown
below, immediately stop using the machine, turn off the power switch, disconnect the power plug,
and immediately contact the nearest dealer or our company directly.
31