![Takara Belmont SPA MIST II Operating Instructions Manual Download Page 27](http://html1.mh-extra.com/html/takara-belmont/spa-mist-ii/spa-mist-ii_operating-instructions-manual_3315202027.webp)
Using the Open Mist Ball Nozzle
Applying the cap practice by using the Open mist ball nozzle
Preparation
Operating Procedure
Replacing the Suction Pad
Install the Open mist ball nozzle on the bowl by using the suction pad.
㸯
Install the cap joint N on the mist cap
(See the section "Preparation" on page 12).
㸯
㸱
Install the flexible hose on the Open mist ball nozzle.
Adjust the nozzle (outlet of mist) in the desired direction in which the mist is atomized.
㸯
Insert the joint hose into
the nozzle
㸰
Insert the joint hose into the cap
joint N.
㸰
Pull off the fixing pin, which is mounted
on the main unit of the Open mist ball
nozzle, using a bar or the like. Then, the
suction pad can be removed from the main unit.
㸯
Insert the new suction pad into the Open
mist ball nozzle, and press in the fixing pin
to fix the pad.
㸰
Information
26
㸺5HFRPPHQGHGSRVLWLRQRI<80(6HULHVERZO㸼㸺5HFRPPHQGHGSRVLWLRQRI566HULHVERZO㸼
Information
Information
Flexible hose
ͤ8VHWKHPDFKLQHXQGHUWKHRSHQPLVWPRGH
CAUTION
Fixing pin
Suction pad
Cap joint N
Joint hose
Nozzle
Open mist ball nozzle
CAUTION
Wipe and clean the position
in advance to which the
Open mist ball nozzle is
installed to remove wetting,
etc. Ignoring this
precaution may make the
suction pad hard to attach.
If the flexible hose is hard
to insert, apply water to
the inside of the flexible
hose, which will make your
work easier.
Pay attention to the positions of the nozzle and the customer's
head. For the RS Series product, in particular, be careful about
temperatures, since the distance to the head is closer. Decrease
the temperature setting if the customer feels too warm. Stop
using the machine if the customer feels sick or is in bad shape
due to excessive temperatures. Ignoring this precaution may
result in burns or dizziness.
Do not apply the cap practice under the open mist mode.
Using the nozzle at a high-temperature level will raise the temperature in the cap, thus resulting
in dizziness, burns, etc.
If the flexible hose is hard to insert,
apply water to the inside of the flexible
hose, which will make your work easier.