This product uses pottery for the basin.
Note in advance that bends and deformations cannot be avoided depending on the product in molding of the neck
position and the pottery, and there are slight variations in height, shape, and weight.
In addition, because of the nature of pottery, pouring hot water in a pottery part may result in a sudden expansion of
that part, causing cracks in the surface.
Do NOT pour hot water in the pottery. Failure to follow this instruction may damage to the pottery, causing injury, or
cause water to enter the upper unit due to a water leak, resulting in formation of rust.
7
Precautions on Resin (Plated) Parts
Check that there are no flaws, cracks, or peeling of the plated surface of the knobs before
using the product. If peeling is observed, immediately stop using the product and contact
your closest dealer or Takara Belmont. Continued operation may result in injuries.
〇
Plating is a thin, hard metal film applied to the surface that may crack or peel due to corrosion or
aged deterioration.
〇
Flaws or cracks may occur on the plated surface due to impacts from falling objects.
〇
Flaws or cracks may occur on the plated surface when a hard object hits the surface.
〇
Peeling of the plating may occur from flaws or cracks on the plated surface.
Example of Flaws on the
Plated Surface
Example of Peeling of the
Plated Surface
Position of Warning Label
Precautions For Use of Basin Products
CAUTION
•
Resin plating is adopted for part of the water stop knob and the temperature control knob.
WARNING
1A0SK2A0
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
