17
■
Neck cushion
1
2
1
2
3
■
Shower head
Shower head Main Unit
Rubber Gasket
(消耗品）
Sprinkling plate
Surface to be Cleaned
(front and back)
CAUTION
Reassemble the shower head.
(Be careful to not forget the rubber gasket.)
Rotate and detach the sprinkling plate and remove the
two parts (sprinkling plate, and rubber gasket).
Clean the sprinkling plate (with water).
・
Remove dirt, such as water stain in the shower holes
on the sprinkling plate, with a toothbrush.
If solvents drip onto the neck cushion, rinse with water as soon as possible.
Failure to follow this instruction may cause deformation or discoloration.
Clean the neck cushion every day. Leaving dirt uncleaned may cause it to get moldy.
At the end of work each day, wash the neck cushion with water, wipe them dry with a towel, and allow them to dry
in the shade.
If it is extremely dirty, wash with detergent diluted with water, and rinse carefully with water.
The neck cushion is consumable supplies. Replace it if it is extremely dirty or the surface has deteriorated.
(available at additional cost)
