Takara Belmont DIVAN-Z AB-DVZF Operation Manual Download Page 1

Page: 1 / 40

Model No.

AB-DVZF

BOOK No.1E09JXAE

2023-04 (1st edition)

Takara Belmont Barber Chair

Operation Manual

Thank you for purchasing this Takara Belmont product.
Be sure to read this operation manual before operating the chair and always operate

the chair properly according to the instructions herein.
Failure to read this operation manual may lead to accidents.

●Carefully store this operation manual in a secure location near this product where

they can be readily accessed, and refer to them whenever necessary.

●This product is a barber chair designed for the services offered at hair salons.

Do not use this product for any purposes other than those described above.

This product shall be operated only by qualified hairdressers.

●Ask your authorized Takara Belmont dealer to install this product.

Please contact Takara Belmont with the BOOK No. (outlined below) if this operation

manual becomes torn or damaged and unreadable, or is lost.

Summary of Contents for DIVAN-Z AB-DVZF









































Search results

Summary of Contents for DIVAN-Z AB-DVZF

Reviews:

Related manuals for DIVAN-Z AB-DVZF

Brands by name

Popular brands

Takara Belmont DIVAN-Z AB-DVZF, Operation Manual

Search results

Summary of Contents for DIVAN-Z AB-DVZF

Reviews:

Related manuals for DIVAN-Z AB-DVZF

Brands by name

Popular brands