4.Damper characteristics vary according to the ambient
temperature. In general, damper characteristics
weaken as the temperature goes up, and become
stronger as the temperature goes down.
This occurs because the viscosity of oil inside the
damper is affected by the temperature change. Once
the temperature returns to normal, so will the damper
characteristics. Please refer to the right diagram tor
change in the action time for a free-closing lid.
'u'
a,
�
f-
15
� 10
"'
C:
5
uffll, na,
■
MitHii
RoHS Compliant
eProducts specification might be changed without notice.
FYN-C1 series
Temperature characteristics
o�-�--�-�--�-�--�-
-10
0
10
20
30
40
50
Ambient temperature["(]
5. The damper action angle is 110
°
as shown below. Rotating it beyond this angle will cause the damper to break. Ensure
that an external stopper is in place. The action angle is based on the width across flats of the case on the back of the
body. The rotation end point is at 90
°
on the basis of the width across flats of the case. (Refer to the figure below.)
Rotation starting point
FYN-C1-R
Rotation end point
*Rotating shaft angle for shipment
Rotation starting point
FYN-C1-L
6. There are dampers that generate torque in either the clockwise or counterclockwise direction when the rotating shaft
is seen from the above. Select a model according to use.
