Takacat - Asia, Middle East & Australia
Page | 5
(NB: The black flaps in the photos below are no longer on the boats as there has been a design change in 2021 – new
photos will be coming soon)
Note – Using a mixture of soap and water will make inserting the bar easier.
STEP 4:
From the front, insert the upper transom bar into the upper set of tubes on the boat hulls. The stainless
tab should be facing down when insert properly. Note – Using a mixture of soap and water will make
inserting the bar easier.
STEP 5:
Slot the smaller motor mount board inside the Tube Transom.
STEP 6:
Creating a sandwich, assemble the rest of the transom. The bolt passes from the rear to the front with
the rubber washer between the wooden motor mount boards.
Proper sandwich order below:
a) Bolt b) SS Washer c) Back Board d) Rubber Washer e) Front Board f) SS Washer g) Hand Nut
Tighten firmly by hand, no tools required