background image

 

 

Takacat - Asia, Middle East & Australia 

 

 Page | 12  

 

SPORT SPECIFICATIONS: 

 

All information contained in this website has been compiled with the greatest care and to the best of 
our knowledge.  Nevertheless, errors cannot be completely ruled out. For this reason, TAKACAT feels 
obliged to point out that it can accept neither a guarantee nor the legal responsibility or any liability 
for consequences resulting from incorrect information. T he specifications of the products which 
TAKACAT distributes and/or offers as a dealer have been adopted by the respective manufacturer. 
TAKACAT accepts no responsibility for their accuracy.  Maximum specifications apply under optimum 
conditions (environment, system configuration, software, etc.).   

Distributor (ASIA): 

Ocean Portables NZ Ltd  - T/A   Takacat Asia  
PO Box 35003 
Browns Bay 
Auckland 0753 
New Zealand 
Email:  

[email protected]

 /  Web:  

www.takacatasia.com

 

Ph:       +6421907110 
 

Distributor (AUSTRALIA): 

Ocean Portables NZ Ltd  - T/A   Takacat Australia 
P O Box 35003 
Browns Bay 
Auckland 0753 
New Zealand 
Email:  

[email protected]

  / Web:  

www.takacat.com.au

 

Ph:       +6421907110 
 
Please note – Takacat (Ocean Portables NZ Ltd) does not take responsibility for any misuse of this 
inflatable catamaran.  Remember others around you and those onboard and always be a responsible 
skipper. 

Summary of Contents for Sport













Reviews: