www.takacat.com
Takacat Owner’s LX Series Manual - 2022
Note – Using a mixture of soap and water will make inserting the bar easier.
4. From the front, insert the upper transom bar into the upper set of tubes on the
boat hulls. The stainless tab should be facing down when insert properly.
Note – Using a mixture of soap and water will make inserting the bar easier.
5. Slot the smaller motor mount board inside the Tube Transom.
6. Creating a sandwich, assemble the rest of the transom. The bolt passes from
the rear to the front with the rubber washer between the wooden motor mount
boards.
Proper sandwich order below:
a) Bolt
b) SS Washer
c) Back Board
d) Rubber Washer
e) Front Board
f) SS Washer
g) Hand Nut
Tighten firmly by hand, no tools required!
