www.takacatasia.com
Takacat Owner’s Manual - 2020
6. Creating a sandwich, assemble the rest of the transom. The bolt passes from
the rear to the front with the rubber washer between the wooden motor mount
boards.
Proper sandwich order below:
a) Bolt
b) SS Washer
c) Back Board
d) Rubber Washer
e) Front Board
f) SS Washer
g) Hand Nut
Tighten firmly by hand, no tools required!
7. Unroll the inflatable floor and insert into its position. There is no need to get it
perfectly under each hull tube, but the rear of the floor should be flush with the
Lower Transom Bar.
