TAJIMA TFMX-IIC, User Manual

Page: 121 / 268

To adjust finishing of embroidering
107
Chapter 5
1
2
3
4
5
6
7
8
9
10
11
7-3. To divide a long stitch (Auto Jump)
This function makes the frame movement to divide by jump automatically when a stitch length exceeds a
setting value. This function reduces the load generated at the frame drive due to heavy weight of the material
to be embroidered. However, dividing by jump will reduce embroidering efficiency.
7-3-1. Explanation on the screen
[a]
Setting for auto jump
NO: Not to perform
2.0 to 9.9:
The machine will jump automatically when a stitch exceeding a set value is given. When a
value is 4.0, the machine will jump automatically if stitches of 4.1 mm and more are given.
When the setting of frame type is set to "Auto Clamp Frame", setting range is 2.0 to 5.0 mm.
[b]
Timing to start moving the frame( → p.113)
[c] R.P.M. at auto jump
YES: To keep (remaining in high speed)
NO: Not to keep (speed reduction according to a stitch length)
7-3-2. How to operate
The following is an example that stitch length to jump automatically is set to "6.0".
(1) To open screen
(2) To select stitch length to perform automatic jump
2 Auto Jump
F1
4.0
240
240 360[ ]
NO/2.0
[mm]
9.9
NO
Yes/No
Frame Start Timing
R.P.M. Keep
[a]
[b]
[c]
)
2 Auto Jump
6(7 6(7
6.0
6(7 6(7