TAJIMA TEHX-C, User Manual

Page: 11 / 140

CHAPTER 1 IMPORTANT WARNING ITEMS FOR SAFE OPERATION
4
WARNING
<During the Machine Operation>
Do not use a device such as a cellular phone that gen-
erates microwave near the control circuits of the
power supply box, the operation panel box, etc. Micro-
wave may cause malfunctioning of the machine.
Do not remove the covers for the shaft and the pulleys
when the machine is running. Do not run the machine
without the covers.
Do not put your hands or face near the moving parts of
the machine.
Especially, vicinities of needle, rotary hook, take-up
lever, pulley, and speed reduction box are dangerous.
Keep away control units such as the power supply box and the controller box (operation panel
box) from water and chemicals. Entry or splashing of them into control units leads to short cir-
cuits of internal circuits, causing fire, electric shock and other troubles. If water or other chemi-
cals enter a control unit, shut off the power at the primary power source and contact your local
distributor.
<During Machine Adjustments>
Stop the machine before carrying out work near the needles such as threading the needle and
checking the finish of embroidery.
Shut off the power supply by turning off the power switch before manually rotating the main
shaft of the machine.
Turn off the primary power source before opening the electrical boxes. Be sure to turn off the
power switch of the machine before turning off the primary power source. If not, it may cause
electric shock.
CAUTION
When operating the machine, always observe the following items to prevent machine or property
damage.
Do not use bent needles or those that do not fit the
materials.
After the completion of work, shut off the power
source by turning off the switch of the power distrib-
utor panel.
Do not put things on the table.
(GC02)
!
!