3.4 Virtual wire installation
The virtual wire can be installed in one of the following ways:
- Securing the wire to the ground with staples.
It is preferable to staple down the virtual wire, if you want to make
adjustments to the virtual wire during the first few weeks of operation.
- Bury the wire
It is preferable to bury the virtual wire if you want to dethatch or aerate
the lawn.
If necessary both methods can be combined so one part of the virtual
wire is stapled down and the remainder is buried.
3. INSTALLATION
- Dig virtual wire with pegs 1 meter per piece in straight-line. Dig corner as
picture.
- Bury virtual wire below grass and fasten it on the ground with pegs, so
that the mower should not cut the wire. If the grass grow up, we can still
keep the virtual wire as before.
virtual wire
Add pegs in order to pull the
virtual wire down to the ground
surface, below the grass tips.
OK
-
P19
-
IMPORTANT
INFORMATION
Hard or dry ground may cause pegs to break when driving them in.
In extreme cases, watering the lawn where the pegs will be driven.
5.9 Address setting
the mower cold communicate with charging
station, there is an ADDRESS between
mower and charging station. User has to set
the address before using the mower.
Otherwise the mower can not start working
in Auto model. A label with Address Code
paste on charging station.
1. Select
ADDRESS
from menu and press
to enter it.
2. Enter password.
3. Press Address Code as the label shows.
5
.
USE
- Press the key to confirm it, the
arrow moves on to the next position.
- Repeat the procedure to set all the
numbers of new password.
- Press to confirm it and press it again
to return back to menu.
TUE
12/14
13:31
SET PASSWORD
1234
1 6°
C
1 6°
C
1 6°
C
1 6°
C
ADDRESS
TUE
12/14
13:31
TIME
1 6°
C
1 6°
C
1 6°
C
1 6°
C
1 6°
C
TUE
1 2/14
1 3 : 3 1
INPUT PASSWORD
0
-
P34
-
Address
:XX
Taizhou
Tianchen Intelligence &Electrics Co,Ltd
Product name: Robot lawn mower
Model: L2X00 IPX4
Input: XXX V --- 2A
Ouput XXX
2A
:
V
—
Made in China
R
O
HS
