manualshive.com logo in svg

Tait TP9400, User Manual

Share
Download
Tait TP9400 User Manual Download Page 118

118  Charging and caring for batteries

Before using the charger

Handle the battery safely

Warning 

Handle the battery safely. Failure to observe 

the following handling recommendations could result in 
personal injury and/or equipment damage.

■

Before using a Li-ion battery, please read the Li-ion 
Battery Safety Information (MPC-00006-xx) 
included with your battery, and follow the 
instructions it provides. Incorrect use of a Li-ion 
battery can cause explosion or fire.

■

Do not short-circuit the battery contacts, neither 
intentionally nor accidentally, e.g. by placing the 
battery with conductive materials such as keys or 
jewelry inside a pocket or container. Short-circuiting 
the battery contacts can heat up the conductive 
material.

Attaching of labels

Warning 

Do not obstruct the vent hole on the battery 

or the vent hole on the radio chassis label. If the vent on 
the battery is obstructed the battery may explode, 
causing personal injury and/ or damage to property. If 
the vent on the radio is obstructed, audio quality and/or 
key function may deteriorate and radio seals may be 
damaged.

For detailed information about attaching labels safely, 
see 

“Attaching labels to the radio or battery” on page 25

.

Summary of Contents for TP9400



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands