Tait TP9400 Series P25 User Manual Download Page 12

Page: 12 / 178

12 For your safety

Batteries

The following batteries have been approved for use with
TP9300/ TP9400 IS portable radios.

Refer also to

"Rating

matching" on page 14

Chargers

The charger for IS radios is marked with an IS circle logo

and has the following product code:

■

T03-22011-ADAA (IECEx and EU)

You must use this charger with an IS battery, as its
internal circuitry provides additional protection for the IS
circuitry in the battery and radio.

Warning

Do not use the charger in a hazardous

location. An explosion could cause serious injury or death.

Notice

The IS battery can only be charged in the

chargers listed above. It will not charge in other TP8100/
TP9300/TP9400 chargers. However, the chargers listed
above can charge non-IS TP8100/TP9300/TP9400
batteries.

The operating temperature range for the charger is +32 °F
to +104 °F (0 °C to +40 °C).

Audio accessories

One or more of the following marks identifies a TP9300/
TP9400 audio accessory as an IS audio accessory:

■

an IS circle logo on the audio accessory

■

a label on the audio accessory, showing IS informa-
tion

Description

Product code

Li-Ion, 2300 mAh, ATEX, IIA

T03-22001-ABAA

Li-Ion, 2300 mAh, ATEX, IIC

T03-22001-ABCA

Li-Ion, 2300 mAh, IECEx, IIA

T03-22001-ADAA

Li-Ion, 2300 mAh, IECEx, IIC

T03-22001-ADCA

Summary of Contents for TP9400 Series P25



















































































































































































Search results

Summary of Contents for TP9400 Series P25

Reviews:

Related manuals for TP9400 Series P25

Brands by name

Popular brands

Tait TP9400 Series P25, User Manual

Search results

Summary of Contents for TP9400 Series P25

Reviews:

Related manuals for TP9400 Series P25

Brands by name

Popular brands