Tait TP9160, User Manual

Page: 7 / 108

For your safety 7
For your
safety
This radio complies with the IEEE and ICNIRP exposure
limits for occupational/controlled RF exposure
environments at operating duty factors of up to 50%
transmitting (even though the approved batteries for
this radio are rated for a 5-5-90 duty factor (5% talk-
5% listen-90% standby)).
Radio frequency emissions limits in
the USA
Part 15 of the FCC Rules imposes RF emission limits
on receivers.
This radio complies with Part 15 of the FCC Rules.
Operation is subject to the condition that this device
does not cause harmful interference.
Unapproved modifications or changes
to radio
The radio is designed to satisfy the applicable
compliance regulations. Do not make modifications or
changes to the radio that are not expressly approved by
Tait Electronics Limited. Failure to do so could invalidate
compliance requirements and void the user’s authority
to operate the radio.
USA public safety bands
(764 –776MHz and 794–806MHz)
Part 90R of the FCC Title 47 of the Code of Federal
Regulations (CFR) deals with the use of frequencies in
the 764 to 776MHz and 794 to 806MHz bands.
Low-power channels
This radio complies with §90.531 (b) (3) and
§90.531 (b) (4) of 47 CFR. These sections state that only
low-power transmission is permitted on the
following channels:
!
Regional Planning channels, as defined in
§90.531 (b) (3).