Tait TP3350 DMR User Manual Download

Page: 58 / 74

58 Charging and caring for batteries

LED behavior

If there is a battery in the charger when power is
supplied to the charger, the LEDs behave as follows:

If the charger does not behave as expected:

■

Make sure the radio or battery is seated properly
in the charger.

■

Check that the charger is properly plugged into
the originally supplied power supply.

■

Check that the battery and charger contacts are
clean. To clean, wipe the contacts with a dry lint-
free cloth to remove any dirt, oil or grease.

Meaning

briefly

The charger has been connected to a power
supply.

steady

The battery is charging.

steady

Charging complete. Remove the battery, or
leave it in the charger.

steady

■

The battery temperature is outside the nor-
mal charging range. Charging will start or
resume once the temperature is within nor-
mal limits. No action is required by you.

■

There is a fault. Contact your dealer.

flashing

If the LEDs for all charger slots continuously
flash orange, or red then orange, the charger
itself may be faulty. Contact your dealer.

all off

There is a fault. Contact your dealer.

Summary of Contents for TP3350 DMR











































































Search results

Summary of Contents for TP3350 DMR

Reviews:

Related manuals for TP3350 DMR

Brands by name

Popular brands

Tait TP3350 DMR, User Manual

Search results

Summary of Contents for TP3350 DMR

Reviews:

Related manuals for TP3350 DMR

Brands by name

Popular brands