14
Installing a T2000
Mount the Microphone clip
1. Mount the microphone clip to the side of the radio cabinet,
as shown below.
2. The power cable has a single black wire that ends in a
solder tag: this is the ground strap. For correct hookswitch
operation (as described in “Using the Microphone” on
page 5), fasten the ground strap’s solder tag to the micro-
phone clip with one of the two microphone mounting
screws, as shown below.
Connect the Radio and the Power Supply
Note:
The red and black wire of the power cable is positive.
1. Make sure that the radio and the T2009 are both turned off
and unplug the T2009 from the mains supply outlet.
radio cabinet
microphone clip
mounting holes
ground strap
T2000 power connector
speaker connector
ground strap
supply wires
