TM9456 Dual-Radio Installation and Programming Guide
Preparing the Installation
16
© Tait Limited
July 2016
1.5
Installation Overview
summarizes how the components in a dual-radio system are
installed. For more detailed instructions, see
Figure 1.1
TM9456 dual body installation overview
b
external speaker (one per
torso)
j
radio body
c
speaker flying lead connector
1)
body remote interface with
link J4 removed (T02-00081-BBAA)
d
Body to body ground
connection
1!
to control head, such as graphical-
display (see example) or hand-held
e
radio body
f
body remote interface with
link J4 fitted (T02-00081-
BAAA)
Control head example:
g
grommet
1@
control head remote cable
h
radio connecting cable
1#
control head remote interface
i
other connectors, for
example, to GPS receiver,
external alert device, ignition
signal. Applies to both bodies
1$
graphical-display control head
1%
supported microphone
e
j
f
h
1@
1#
1$
to antenna
to second antenna
to power supply
to power supply
other
connectors
I
to speaker
b
to speaker
b
1%
g
optional
required
1)
c
1!
Control head example
Notice
The configuration shown must be
followed to ensure proper functionality.
d
VHF NTID 3
UHF NTID 1
NTID 2
