Tait TM9315 User Manual Download

Page: 52 / 62

52 Tait Software Licence Agreement

Tait Software Licence Agreement

This Software License Agreement

("Agreement") is between you

(“Licensee”) and Tait Limited (“Tait").
By using any of the Software items

embedded and pre-loaded in the

related Tait Designated Product,

included on CD, downloaded from the

Tait website, or provided in any other

form, you agree to be bound by the

terms of this Agreement. If you do not

agree to the terms of this Agreement,

do not install or use any of the

Software. If you install or use any of

the Software, that will be deemed to be

acceptance of the terms of this

Agreement.
For good and valuable consideration,

the parties agree as follows:

ECTION

1 DEFINITIONS

“Confidential Information”

means all

or any information supplied to or

received by Licensee from Tait,

whether before or after installation or

use and whether directly or indirectly

pertaining to the Software and

Documentation supplied by Tait,

including without limitation all

information relating to the Designated

Products, hardware, software;

trademarks; operations, processes,

and related business affairs of Tait;

and including any other goods or

property supplied by Tait to Licensee

pursuant to the terms of this

Agreement.

“Designated Products”

means

products provided by Tait to Licensee

with which or for which the Software

and Documentation is licensed for

use.

“Documentation”

means product and

software documentation that specifies

technical and performance features

and capabilities; user, operation, and

training manuals for the Software; and

all physical or electronic media upon

which such information is provided.

“Executable Code”

means Software

in a form that can be run in a computer

and typically refers to machine

language, which is comprised of native

instructions the computer carries out in

hardware. Executable code may also

refer to programs written in interpreted

languages that require additional

software to actually execute.

“Intellectual Property Rights”

and

“Intellectual Property”

mean the

following or their substantial

equivalents or counterparts,

recognized by or through action before

any governmental authority in any

jurisdiction throughout the world and

including, but not limited to all rights in

patents, patent applications,

inventions, copyrights, trademarks,

trade secrets, trade names, and other

proprietary rights in or relating to the

Software and Documentation;

including any adaptations, corrections,

de-compilations, disassemblies,

emulations, enhancements fixes,

modifications, translations and

updates to or derivative works from,

the Software or Documentation,

whether made by Tait or another party,

or any improvements that result from

Tait processes or, provision of

information services.

“Licensee”

means any individual or

entity that has accepted the terms of

this License.

“Open Source Software”

means

software with freely obtainable source

code and license for modification, or

permission for free distribution.

“Open Source Software License”

means the terms or conditions under

which the Open Source Software is

licensed.

Summary of Contents for TM9315































































Search results

Summary of Contents for TM9315

Reviews:

Related manuals for TM9315

Brands by name

Popular brands

Tait TM9315, User Manual

Search results

Summary of Contents for TM9315

Reviews:

Related manuals for TM9315

Brands by name

Popular brands