78 Operating in conventional mode
The following messages may appear when using nuisance
delete to temporarily delete a channel from a group, when
adding or deleting channels from a group, or changing a
group’s transmit or priority channels.
Message
Meaning
Scanning not on
You cannot use nuisance delete to temporarily delete a
channel from a group, as there is no group currently
selected.
No channel
captured
You cannot use nuisance delete to temporarily delete a
channel from the group, as there is no channel
currently captured (the amber LED is glowing and not
flashing).
Not enough
channels in
group
You cannot use nuisance delete to temporarily delete
the channel from the group, as the captured channel is
the last remaining group member.
Cannot delete
channel
You cannot use nuisance delete to temporarily delete
the channel from the group. The captured channel may
be the selected channel in a background scan group.
Cannot delete
priority chan
You cannot use nuisance delete to temporarily delete
the channel from the group, as the captured channel is
a priority channel.
Only two chan-
nels in group
You cannot delete a channel from the group, as there
would be only one group member left.
No items
in list
The action you are attempting is not allowed. Either:
■
the group does not have a preset transmit channel
or priority channels programmed, or
■
you have added all the channels in the zone to the
current group.
Group full
You cannot add any more channels to the group, as
the maximum number of members (50) has been
reached.
