Operating in MPT trunked mode 113
3
Press
Send
.
The call details appear in the
display. While the call is being
setup, you can cancel the call by
pressing
Clear
.
Placing the radio in do-not-disturb mode
If you do not want calls for a while, you can place the radio in
do-not-disturb mode, so that incoming calls can be ignored.
You can make outgoing calls in the usual way.
While do-not-disturb mode is active, incoming calls cannot
be stored in the call queue.
To place the radio in do-not-disturb mode, you may be able
to either:
■
use a programmed function key, or
■
use the Main menu.
Activating do-not-disturb mode by using a
function key
1
Press the function key programmed for do not disturb, to
activate the do-not-disturb function.
The message
Do not disturb activated
appears in the
display. Your radio will now ignore all incoming calls.
2
To deactivate the do-not-disturb function, press the do-
not-disturb function key again.
The message
Do not disturb deactivated
appears in
the display.
