Tait TM8000 Series, Service Manual

Page: 29 / 244

TM8100 Mobile Radio Service Manual Introduction 29
May 2004 © Tait Electronics Limited
Product Codes
for Control Head
The product codes for the control head have the format:
TMAC ab – cc
where a identifies the type of control head, b identifies any options
selected, and cc identifies badging and branding options. By type is
meant whether the control head is blank or has a user interface with a
one- or two-digit display; allowance is made for additional types in the
future. Only the digits 1 to 9 are allowed for
a (0 is not used), and the
digits 0 to 9 for b ; the latter is set to 0 when no options are added. Both
letters and digits may be used for cc . The default for cc is 0T; on one-
and two-digit-display control heads the Tait logo is then displayed next
to the LCD screen; the product model code TM8110 and TM8115
respectively is displayed above the speaker grille.
Figure 1.9 illustrates the
product codes in use at the time of publication.
1.6 Specifications
Introduction
General specifications for TM8100 radios are given in Table 1.1 and
Table 1.2. The parameter values quoted in the tables are minimum
values. These specifications are valid for the date of publication only.
The specifications will also be found on the TaitWorld website in the area
reserved for TM8000 products. The latter specifications are updated
whenever changes occur.