Tait TM8000 Series, Service Manual

Page: 100 / 244

100 General Information TM8100 Mobile Radio Service Manual
May 2004 © Tait Electronics Limited
Table 4.6 CCTM commands in the radio-information, radio-control and system categories
Command
Usage
Entry at keyboard Response on screen
Radio-information category
94 – Radio serial number
Reads the serial number of the
radio
94 x
where x is the serial number
(an eight-digit number)
96 – Firmware version
Reads the version number of the
radio firmware
96 QMA1F_ x _ y
where
x
is a three-character
identifier and y is an eight-digit
version number
97 – Boot-code version
Reads the version number of the
boot code
97 QMA1B_ x _ y
where
x
is a three-character
identifier and y is an eight-digit
version number
98 – FPGA version
Reads the version number of the
FPGA
98 QMA1G_ x _ y
where
x
is a three-character
identifier and y is an eight-digit
version number
133 – Hardware version
Reads the product code of the
radio body and the hardware
version number
133 x
y
where x is the product code
and
y
is the version number
(a four-digit number)
134 – FLASH serial number
Reads the serial number of the
FLASH memory
134 x
where x is the serial number
(a 16-digit hexadecimal number)
Radio-control category
400 – Select channel
Changes the current channel to
that specified
400 x
(alternatively
* x
)
where x is a valid channel number
None
System category
46 – Supply voltage
Reads the supply voltage
46 x
where x is the supply voltage in
millivolts
203 – Clear system error
Clears the last recorded system
error
203 None
204 – Read system error
Reads the last recorded system
error and the associated data
204 SysErr: x
y
where
x
is the error number and
y represents the associated data