TB7100 Installation Guide
Connection
13
© Tait Electronics Limited May 2005
2
Connection
This chapter provides information on all the inputs and outputs on the
TB7100 base station.
2.1
Overview of Inputs and Outputs
This section identifies the main input and output connections for the
TB7100 base station. The figure below identifies the connections at the
front and rear of the base station. Refer to the following sections in this
chapter for more details on these connections.
2.2
Power Supply Connections
DC Power
The TB7100 base station is designed to accept a nominal 13.8VDC, with
negative ground.
Figure 2.1
TB7100 base station inputs and outputs
b
Programming/Microphone socket (PROG/MIC)
f
Receiver Antenna (Rx)
c
Serial Interface (IOIOI)
g
Transmitter Antenna (Tx/ANT) This is transmit
and receive if a duplexer is fitted
d
System Interface (SYSTEM)
h
ground point
e
13.8VDC Input
b
c
e
d
h
g
f
Rear
Front
