Tait T800 - 22 - 0x00, Reference Manual

Page: 8 / 74

T800questV6.doc : Issued 25 Aug 1999 Page 3 of 3
PART 10
This is to inform RSD of your required delivery DATE .
PART 11 (TRANSMITTER/EXCITER PARAMETERS)
This section is to allow you to inform RSD of operational parameters for the equipment.
By ticking the STANDARD box you are indicating that all parameters required are as
stated in the Set-up procedure in the appropriate equipment manual, and the
frequency/frequencies required are as stated in PART 05. If no frequencies are stated in
Part 05 then the equipment is to be Set-up on TEST frequencies.
By ticking the CUSTOMISED box you are indicating special requirements are needed.
You must then fill in all the required details in the boxes below to allow RSD to set-up
the equipment to those specifications and options, and to supply any other information
that may be required by RSD.
PART 12 (RECEIVER PARAMETERS)
Same as above.