manualshive.com logo in svg

Tait T2000 SERIES II, Service Manual

Share
Download
Tait T2000 SERIES II Service Manual Download Page 39

M2000-00

Introduction To Servicing

3.11

Copyright TEL

30/12/97

3.2.5

To Detach The EMC Filter PCB 

Refer to Figure 3.7.

Remove the top cover and open the logic PCB, as described in Section 3.2.1.

Remove the microprocessor shield and bottom cover, as described in Section 3.2.2. 

The control head (locally mounted models) or dummy front panel (remotely
mounted models) can now be removed.

Unplug the loom running between the logic PCB and EMC filter PCB (18).

Unplug the loom running between the EMC filter PCB and the control head.

Remove the 4 EMC filter PCB retaining screws. The EMC filter PCB can now be
lifted from the chassis.

Figure 3.7   EMC Filter PCB Mounting

3.2.6

To Remote A Locally Mounted T2020, T2040 & T2050 

Refer to Section 8.16, “T2000-A03/-A04/-A16 Remote Loom Kits”.

Summary of Contents for T2000 SERIES II























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands