Tait orca Manual Download Page 54 | Manualshive

Page: 54 / 56

background image

54

54

54

54

54

Tait Electronics Ltd

Software Licence Agreement

This legal document is an Agreement between you (the “Licencee”)
and Tait Electronics Limited (“Tait”). By opening this product package
and/or using the product you agree to be bound by the terms of this
Agreement. If you do not agree to the terms of this Agreement, do not
open the product package and immediately return the unopened prod-
uct package to Tait. If you open the product package, that will be deemed
to be acceptance of the terms of this licence agreement.

Licence

In consideration of the payment of the Licence Fee, which forms part of
the price you paid for products you acquired from Tait or its subsidiary
or agent (the “products”) and our willingness to be bound by the terms
of this agreement, Tait grants to you as Licencee the non-exclusive right
to use the copy of a Tait software program included in the products (the
“Software”).

In particular, the Licencee may use the program on a single machine
and if the software is supplied on a diskette, the licensee may:
(a) Copy the program into any machine readable or printed form for

backup purposes in support of your use of the program on the
single machine (certain programs, however, may include mecha-
nisms to limit or inhibit copying; they are marked “copy protected”),
provided the copyright notice must be reproduced and included
on any such copy of the Software.

(b) Merge it into another program for your use on the single machine.

(Any portion of this program merged into another program will
continue to be subject to the terms and conditions of this Agree-
ment.)

The Licencee may not duplicate, modify, reverse compile or reverse
assemble the Software in whole or part.

Title to software

This agreement does not constitute a contract of sale in relation to the
Software supplied to the Licencee. Not withstanding the Licencee may
own the magnetic or other physical media on which the Software was
originally supplied, or has subsequently been recorded or fixed, it is a
fundamental term of this Agreement that at all times title and owner-
ship of the Software, whether on the original media or otherwise, shall
remain vested in Tait or third parties who have granted licences to Tait.

«
...
52
53
54
55
56
»

Summary of Contents for orca

























































Reviews:

No comments

Related manuals for orca

Brand: Wallbox Pages: 34

Brand: walimex Pages: 12

e355 Gang Charger

Brand: VeriFone Pages: 2

MULTI US 25000/MXS 25EC NA

Brand: CTEK Pages: 32

Brand: Orbis Pages: 120

Brand: La Marche Pages: 28

Brand: Powergen Pages: 12

Brand: CEMONT Pages: 56

VELOX 1200T CD.2

Brand: CEMONT Pages: 82

Brand: Monzana Pages: 45

BOLT ACDC 58830

Brand: Halo Pages: 18

Brand: Huawei Pages: 208

Brand: NEC Pages: 71

Brand: NEC Pages: 174

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands