Tainet Xstream 1300 Series, User Manual

Page: 53 / 86

CHAPTER 5 SYSTEM TERMINAL OPERATION
5.4 Pop-Up Boxes
Once an error or any information note has occurred, a pop-up box will appear
over the current screen to assist operations.
The Craft Port could assist the system maintenance for a standalone
termination unit like the XSTREAM 1300. The PCs or Terminals with COM
port could be connected to the XSTREAM 1300 via the Craft Port.
5.5 Procedures
1. Make sure that PCs or Terminals of the COM port setting are set to
#
At least 9600 baud rate
#
8-bit characters
#
No parity
#
1 stop bit
#
Hardware flow control
#
ANSI terminal type
2. Plug the 9-pin of the terminal cable to both ends (the XSTREAM 1300’s
Craft Port and PC’s COM port). (See Figure 5-1)
PC or Terminal
Craft Port DB9
X
STREAM
L 2048 Kbps CO
handshaking I
REM/LOC HOME
xDSL series
PWR
CPE
DSL
DTE1
DTE2
SQ
ALM
TST
1300
Figure 5-1 : The Craft Port Connection to PCs or Terminals COM Port
41