Tainet VENUS 2908-4S4O, User Manual

Page: 160 / 225

Chapter 3 Configuration and Management
144
Analog(FXS/FXO)

Rep flash time(ms) default value is 200
This option is used for controlling the flash timer which FXO will generate when it
receives flash notice from FXS INFO message.
Depends on the PBX or PSTN line connects to this FXO port, the value can be
adjusted for better compatibility.
When setup complete, when user on FXS port off-hooks, it will be directly routed to
remote FXO port. When FXO port is being called from PSTN or PBX side, the call
will be directed to remote FXS port.
3.9 Navigation the Command Line Interface
The Command Line Interface is designed mostly for technical support engineers. It
provides a Command Line Interface (CLI) where user can enter commands

To setup detailed configuration

To monitor detailed system status messages, and

To diagnose the device