Tainet VENUS 2908-4S4O, User Manual

Page: 103 / 225

Chapter 3 Configuration and Management
87
Field Description
CLIP mode Select from Bell Core, ETSI and DTMF for Calling Line
Identification Presentation.
CLIP type Select from NA, Japan, ETSI, YDN, BT and Canada for
the type of Calling Line Identification Presentation.
DTMF prefix
number for CLIP D(Default)This is just for DTMF caller ID display.
Deny second
stage dialing 1. Disable (Default)
2. Enable, Deny second stage dialing if needed.
Partial digit
timeout The time between partial digits
Critical digit
timeout The time between Critical digits
Inter digit timeout The time between two digits input.
Max concurrent
call The max concurrent call is allowed in the device.
0, not limit;
E164 mode Disable (Default)/ Enable (E164 function)
Dialing prefix To append the prefix to the dial string. Used for all the
users of the device to share a dialing prefix.
Emergency call
number1 The emergency call number
Emergency call
number2 The emergency call number
Emergency call
number3 The emergency call number
Emergency call
number4 The emergency call number
Emergency call
indication mode
1.Disable (Doesn‟t ring when caller hung up and release
the call)
2. Enable (Ring when caller hung up and remain t the call)
Call hold 1. Disable (Default)
2. Enable (support music on hold, no checking)
Call hold mode 1. IP 0.0.0.0(Default)
2. SendOnly
3. Inactive
Call waiting 1. Disable (Default)
2. Enable
Call waiting tone
interval 3 (Default value)
The call waiting tone interval time in seconds.
Call waiting tone Set times playing Call waiting tone. (Invalid for Current