Chapter 3
Front Panel and Menu Tree
19
3.3
Operating the TAINET Network Series Modem
Key : Total 5 keys, as follow:
VO/DA
It is used as the voice/data select key for dial line
application, Disconnect/Reconnect selection for leased line
applications, or "home" key for set-up menu to go back to
the home menu.
Left key ; It is used to shift to left field.
Right key; It is used to shift to right field or next item.
ENTER
Enter key; It is used to enter the next lower level menu or
confirm selections.
EXIT
Exit key; use it to go back to the upper level menu.
LED indicator : total 10 indicators as following:
PWR --
On for power supply ok.
DTR --
On for DTR signal present.
DSR --
On for DSR signal present.
RTS --
On for RTS signal present.
CTS --
On for CTS signal present.
TXD --
On for "0", off for "1" TXD signal present.
DCD --
On for received carrier signal (DCD) present.
RXD --
On for "0", off for "1", RXD signal present..
OH
--
On for Off Hook.
TST --
On for test mode active.
LCD displayer :
The T-336Cx has a 2 by 16 characters LCD with auto backlight control. Some
different pictures of the LCD display are shown below.
Top Menu
Example:
V34+ 336 V42bis
D ANS CONNECT 9
•
Description:
1) Modem Protocol: V34+ 336,V34+ 312,V34 288, V32b 144T,
V32 96T, V22b 24,....
2) Data Protocol: V.42bis, V.42, MNP-5, Normal, Direct.