Tainet T-336C Series, Manual

Page: 9 / 106

T-336Cx/Nx/NDx
使用手冊
vii
FCC REQUIREMENTS
This equipment complies with Part 68 of the FCC Rules. On the base unit of this equipment
is a label that contains
，
among other information
，
the FCC Registration Number and
Ringer Equivalence Number (REN) for this equipment. IF REQUESTED
，
THIS
INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.
The REN is useful to determine the quantity of devices you may connect to your telephone
line and still have all of those devices ring when your telephone number is called. In most
，
but not all areas
，
the sum of the REN's of all devices connected to one line should not
exceed five (5.0). To be certain of the number of devices you may connect to your line
，
as
determined by the REN you should contact your local telephone company to determine the
maximum REN to your calling area.
If your equipment causes harm to the telephone network
，
the telephone company may
discontinue your service temporarily. If possible
，
they will notify you in advance. But the
advance notice isn't practical
，
you will be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC. Your telephone company may make changes in
its facilities
，
equipment
，
operations or procedures that could affect the proper functioning
of your equipment. If they do
，
you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment
，
please contact the following
address and phone number for information on obtaining service or repairs.
The telephone company may ask that you disconnect this equipment from the network until
the problem has been corrected or until you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
COMPANY: SUMMIT MICRO DESIGN
，
INC.
ADDRESS: 485 MACARA AVE.
，
SUITE 901 SUNNYVALE
，
CA 94086 USA
TEL NO: (408)739-6348