background image

-2-

WARNING: 

To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. 
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclo-
sure that may be of sufficient magni-
tude to constitute a risk of electric
shock to persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in the
literature accompanying the appli-
ance.

The serial number of this product may be found on the
surface of the unit.
You should note the serial number of this unit in the
space provided and retain this instruction as a perma-
nent record of your purchase to aid identification in the
event of theft.

Model No. 

Serial No. 

SA 1965

SA 1966

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

Caution:

Before attempting to operate this product, please read
the label on the surface of the unit. 

Safety Precautions ................................................... 3
Purpose of Use  ........................................................ 4
Operation ................................................................. 5
Names of Parts  ........................................................ 5
Inspection and Installation Before Use  .................... 6
Instructions for Use .................................................. 7

After Use .................................................................. 9
After-Sale Service .................................................. 10
Specifications ......................................................... 10
Accessories ........................................................... 10

CONTENTS

Summary of Contents for Ti-2


















Reviews: