Use independent
outlet:
Ensure power source is from dedicated outlet of at least 15A
(110-120V), or at least 8A (220-240V). Using branch sockets could be
the cause of abnormal heat, fire, etc.
Do not bend power
plug contacts:
Do not bend plug contacts to prevent the plug from dropping out of the
electric outlet. Imperfect contact could be the cause of fire.
Hold plug to
remove:
Hold the plug and not the cord when removing the plug from the electric
outlet. Not doing so could result in an electric shock or ignition.
CAUTION
CAUTION
CAUTION
CAUTION
Do not touch
with wet-hand:
Do not touch or operate electric parts such as the plug, switch and etc.
It may cause an electric shock.
Do not drop:
Do not drop the product or give strong pressure on it. It may cause
mechanical/electrical problems or fire.
Discard of packing
plastic bag
immediately:
Discard immediately the plastic bag which the product was packed
inside. Keep it out of children’s reach to prevent incidents of
suffocation.
Do not place
heavy items:
Do not place heavy items or water containers on top of “HOTCABI”.
Such may cause damage, injury, short-circuit, electric shock, corrosion,
failure, by drop or toppling.
Use
individually
wrapped towels:
Use heat
resisting polyethylene
wrapper:
Use pre-moistened towels which come in heat resisting polyethylene
wrapper. Towels sometimes get dry or discolor if not polyethylene
pouched. When using towel from home (as opposed to those provided
by special suppliers), wring them out rather tightly (to some 2.5 times
the dry weight), place them in a polyethylene wrapper and seal the
wrapped towels for use.
Use heat resisting at least at least 248°F (120℃) polyethylene
wrapper. When polyethylene or vinyl wrappers with a low heat
resisting property are used, they may at times melt making towels
useless or cause discoloration.
Use basket:
Always place towels on the basket and then store in the cabinet.
If not, wrapper could melt and make towels useless or cause
discoloration.
Do not storage
too many towels:
Do not storage too many towels to prevent touching to inner box
surface where it may excess over 212°F (100℃).
Polyethylene bag
may be melted and it cause of changing towel color.
－４－
