background image

HC-11LX Pro

Body

Power cord

Plug

Door back

Rear view

Power switch/LED(green) 

Mode change switch

Operation panel

Mode indication LED

Handle

Front view

Inner box

Basket

Gasket

Drain tray

7

1. Remove the product from packing carton and make sure that Instruction 

Manual and Accessories are included.

2. Set the product as follows:

●At a place where it is flat and stable.
●At a place where it is not affected by heat and avoid places where there is 

direct sunlight, and near stoves, microwave ovens, etc. (To be set away from 
such units by at least 50cm.)

●Away from moist places or where it is susceptible to being splashed with water.
●Do not block the air inlet on the back or the exhaust outlet on the side.
●Make a 10cm or more clearance around the air inlet side, the exhaust outlet 

side, and the top side of the product. When placing the product on a shelf or 
the like, equip an air inlet on the back and an exhaust outlet on the side to 
prevent heat from becoming trapped. (If the temperature rises around the air 
inlet, performance can be degraded or a failure can result.)

Checking Prior to Use and Setting

10 cm

at least

Intake air

Exhaust air

Intake air

10 cm

at least

10 cm

at least

Exhaust outlet

(equipped on 

both sides)

Air inlet

Filter

LED(green)

LED(orange)

LED(blue)

10 cm at least

10 cm at least

Exhaust air

Exhaust air

Summary of Contents for HOT&COOL CONVERTIBLE CABI HC-11LX Pro













Reviews: