Taifun power source
Operation manual
T E C H N I C A L D AT A
Supply voltage Ui
(automatically monitored)
One single unprotected Li-battery with min. 2.8 volt and max. 4.6 volt under
load!
Output voltage Uo
(automatically monitored)
Adjustable between 2.5 volt and 8.0 volt in U-mode
Up to 8.0 volt in I- and P-mode
The output voltage is not more than twice the supply voltage
(e.g. Ui = 3.7V → Uo max. = 7.4V)
Output current Io
(automatically monitored)
Adjustable between 1.5 and 5.0 Ampere in I-mode
Up to 5.0 amps in U- and P-mode (7.8 amps in hot start, but max. 24 watt)
Output power Po
(automatically monitored)
Adjustable between 5.0 and 24.0 watt in P-mode
Up to 24.0 watt in U- and I-mode
Evaporator resistance Ro
(automatically monitored)
Supported are 0.7 to 6.0 ohms
Standby current
~0.5 milliampere (standby or after 2 seconds without operation)
Hot start
2 levels
Display
three-digit 7-segment LED-Display
Control
Silent button with gold contacts for long lifetime
Key illumination
bi-colored (red / green)
Control modes
Power control (P-mode) in 0.5 watt steps
Voltage control (U-mode) in 0.1 volt steps
Current control (I-mode) in 0.1 amp steps
(automatic conversion when changing the control mode)
Alarm threshold for low battery
power
2.9 - 3.6 volt in 0.1 volt steps
Cut-off threshold for low bat-
tery power
2.8 - 3.5 volt in 0.1 volt steps (Please note the battery manufacturers cut-off
voltage!)
Resistance measurement
Integrated resistance measurement in 0.1 ohms (rounded!)
Voltage measurement
Idle and with current load in 0.1 volt steps
Degree of efficiency
Depending on the load between 86% and 95%
Safety mechanisms
Reverse battery protection
Integrated over-temperature protection
Unintended trigger guard (Standby)
© 2013 SmokerStore GmbH
Page
: 7 of 16
Summary of Contents for the eye
Page 1: ......
