Taifun® LTB
–
User Manual
english
11
Preparations before first use
Saline solution
Give two drops of saline solution into the chamber. This will
increase the electrical conductivity of leaked liquid. The
saline solution is necessary for the correct function of the
sensor.
After a while, a salt crust will form inside the chamber. As
long as the salt crust remains visible, adding of further salt
solution is not necessary.
Coil building
(see: Building of coils)
Filling
(see: Filling of the tank)
Insert shots
Put the acrylic shots carefully into the recesses provided for
them above or below the atomizers.
The acrylic shot with the logo should be attached in the
upper recess.
