Taifun® GT III – User Manual
english
5
Attaching a coil
On the base there are 2 screws, which are used to fix the
wire (plus and minus pole).
The screws are slightly offset so that the wire can be easily
attached.
It is advisable to place the wire ends clockwise around the
screws and fix the coil by tightening the screws.
The coil should be located centrally above the air outlet and
should not touch the surrounding metal parts (risk of short
circuit).
The cotton is passed through the coil and into the side
pockets.
The side pockets should be completely covered with cotton
from the inside, but the cotton should not be plugged in.
Via the side openings (depending on the setting of the
Liquid Control) the liquid can get from the tank to the coil.
(see Coil Example, page 18)